TAS5751MDCAR 线性-放大器-音频
IC AMP CLASS D STER 25W 48HTSSOP
TAS5751MDCAR 线性-放大器-音频 的技术参数：
|
类别 |
线性-放大器-音频 |
|
制造商 |
Texas Instruments |
|
类型 |
D 类 |
|
输出类型 |
2 通道（立体声） |
|
不同负载时(MAX)输出功率 x 通道数 |
25W x 2 @ 8 欧姆 |
|
电压 - 供电 |
3V ~ 3.6V |
|
特性 |
消除爆音，短路和热保护 |
|
安装类型 |
表面贴装型 |
|
工作温度 |
0°C ~ 85°C（TA） |
|
封装/外壳 |
48-PowerTQFP （7x7） |
|
安装风格 |
SMD/SMT |
TAS5751MDCAR 线性-放大器-音频 的技术参数：
The TAS5751M device is an efficient, digital-input audio amplifierfor driving stereo speakers configured as a bridge tied load (BTL). In parallel bridge tied load(PBTL) in can produce higher power by driving the parallel outputs into a single lower impedanceload. One serial data input allows processing of up to two discrete audio channels and seamlessintegration to most digital audio processors and MPEG decoders. The device accepts a wide range ofinput data and data rates. A fully programmable data path routes these channels to the internalspeaker drivers.
The TAS5751M device is a slave-only device receiving all clocks fromexternal sources. The TAS5751M device operates with a PWM carrier between a384-kHz switching rate and a 288-kHz switching rate, depending on the input sample rate.Oversampling combined with a fourth-order noise shaper provides a flat noise floor and excellentdynamic range from 20 Hz to 20 kHz.
询价
