VND5T050AKTR-E 原装 汽车智能功率IC
Double channel high-side driver with analog current sense for 24 V automotive applications
支持模拟电流感应的双通道高侧驱动器，用于24V汽车应用
VND5T050AKTR-E 原装 汽车智能功率IC 的技术参数：
类别 | 集成电路（IC） PMIC - 配电开关，负载驱动器 |
制造商 | STMicroelectronics |
系列 | VIPower? |
开关类型 | 通用 |
输出数 | 2 |
比率 - 输入:输出 | 1：1 |
输出配置 | 高端 |
输出类型 | N 通道 |
接口 | 开/关 |
电压 - 负载 | 8V ~ 36V |
电压 - 供电 (Vcc/Vdd) | 不需要 |
电流 - 输出（MAX） | 24A |
导通电阻（典型值） | 50 毫欧 |
输入类型 | 非反相 |
故障保护 | 限流（固定），开路负载检测，超温，过压 |
工作温度 | -40°C ~ 150°C（TJ） |
安装类型 | 表面贴装型 |
封装/外壳 | 24-PowerBSOP（0.295"，7.50mm 宽） |
KLMBG2JETD-B041 10K 22+
KLMAG1JETD-B041 10K 22+
KLM8G1GETF-B041 10K 22+
KLM4G1FETE-B041 10K 22+
K4E8E324EB-EGCF 10K 22+
K4E6E304EB-EGCF 10K 22+
K4E6E304EC-EGCG 10K 22+
K4B4G1646E-BCNB 10K 22+
K4A8G165WB-BCRC 10K 22+
只做原装现货 有需求请联系
VND5T050AKTR-E 原装 汽车智能功率IC 的描述：
The VND5T050AK-E is a monolithic device made using STMicroelectronics VIPower technology, intended for driving resistive or inductive loads with one side connected to the ground. Active VCC pin voltage clamp protects the device against low energy spikes.
The device integrates an analog current sense, which delivers a current proportional to the load current.
Fault conditions such as overload, overtemperature, or short to VCC are reported via the current sense pin.
Output current limitation protects the device in overload conditions. The device latches off in case of overload or thermal shutdown.
The device is reset by a low level pass on the fault reset standby pin.
A permanent low level on the inputs and on the fault reset standby pins disables all outputs and sets the device in standby mode.
询价
