VND5T100LAJTR-E 原装 汽车智能功率IC
支持模拟电流感应的双通道高侧驱动器，用于24 V汽车应用
VND5T100LAJTR-E 原装 汽车智能功率IC 的技术参数：
制造商 | STMicroelectronics |
产品种类 | 门驱动器 |
RoHS | 是 |
系列 | VND5T100LAJ-E |
资格 | AEC-Q100 |
封装 | Cut Tape |
封装 | MouseReel |
封装 | Reel |
技术 | Si |
商标 | STMicroelectronics |
湿度敏感性 | Yes |
产品类型 | Gate Drivers |
工厂包装数量 | 2500 |
子类别 | PMIC - Power Management ICs |
KLMBG2JETD-B041 10K 22+
KLMAG1JETD-B041 10K 22+
KLM8G1GETF-B041 10K 22+
KLM4G1FETE-B041 10K 22+
K4E8E324EB-EGCF 10K 22+
K4E6E304EB-EGCF 10K 22+
K4E6E304EC-EGCG 10K 22+
K4B4G1646E-BCNB 10K 22+
K4A8G165WB-BCRC 10K 22+
只做原装现货 有需求请联系
VND5T100LAJTR-E 原装 汽车智能功率IC 的描述：
The VND5T100LAJ-E and VND5T100LAS-E are monolithic devices made using STMicroelectronics VIPower technology, intended for driving resistive or inductive loads with one side connected to the ground. Active VCC pin voltage clamp protects the device against low energy spikes.
These devices integrate an analog current sense, which delivers a current proportional to the load current.
Fault conditions such as overload, overtemperature, or short to VCC are reported via the current sense pin.
Output current limitation protects the devices in overload conditions. The device latches off in case of overload or thermal shutdown.
The devices are reset by a low level pass on the fault reset standby pin.
A permanent low level on the inputs and on the fault reset standby pin disables all outputs and sets the device in standby mode.
询价
