SN75LVDS83BDGGR 原装 接口IC
SN75LVDS83B FlatLink? Transmitter
10MHz 至 135MHz、28 位 LVDS 变送器/串行器与 FlatLink? 集成电路
SN75LVDS83BDGGR 原装 接口IC 的技术参数：
类别 | 集成电路（IC） 接口 - 驱动器，接收器，收发器 |
制造商 | Texas Instruments |
系列 | FlatLink? |
协议 | LVDS |
驱动器/接收器数 | 5/0 |
电压 - 供电 | 3V ~ 3.6V |
工作温度 | -10°C ~ 70°C |
安装类型 | 表面贴装型 |
封装/外壳 | 56-TFSOP（0.240"，6.10mm 宽） |
SN75LVDS83BDGGR原装 接口IC 的描述：
The SN75LVDS83B FlatLink? transmitter contains four 7-bit parallel-load serial-out shift registers, a 7X clock synthesizer, and five Low-Voltage Differential Signaling (LVDS) line drivers in a single integrated circuit. These functions allow 28 bits of single-ended LVTTL data to be synchronously transmitted over five balanced-pair conductors for receipt by a compatible receiver, such as the SN75LVDS82 and LCD panels with integrated LVDS receiver.
When transmitting, data bits D0 through D27 are each loaded into registers upon the edge of the input clock signal (CLKIN). The rising or falling edge of the clock can be selected via the clock select (CLKSEL) pin. The frequency of CLKIN is multiplied seven times, and then used to unload the data registers in 7-bit slices and serially. The four serial streams and a phase-locked clock (CLKOUT) are then output to LVDS output drivers. The frequency of CLKOUT is the same as the input clock, CLKIN.
询价
