相关证件: 
会员类型:
会员年限:3年
MX25L3233FZBI-08G原装 NOR FLASH
FLASH - NOR 存储器 IC 32Mb SPI - 四 I/O 133 MHz 8-USON(4x3)闪存
MX25L3233FZBI-08G原装 NOR FLASH 的技术参数:
制造商 | Macronix |
产品类型 | Serial NOR Flash |
工作温度 | -40° C to 85° C |
封装 / 箱体 | 4x3mm 8-USON |
RoHS | 是 |
容量 | 32M-BIT [x 1/x 2/x 4] |
电压-供电 | 2.65V ~ 3.6V |
时钟频率 | 133MHz |
架构 | 8M x 4 |
写周期时间-字,页 | 50μs,1.2ms |
KLMBG2JETD-B041 10K 22+
KLMAG1JETD-B041 10K 22+
KLM8G1GETF-B041 10K 22+
KLM4G1FETE-B041 10K 22+
K4E8E324EB-EGCF 10K 22+
K4E6E304EB-EGCF 10K 22+
K4E6E304EC-EGCG 10K 22+
K4B4G1646E-BCNB 10K 22+
K4A8G165WB-BCRC 10K 22+
优势出,有需要的欢迎联系
MX25L3233FZBI-08G原装 NOR FLASH 的描述:
MX25L3233F is 32Mb bits Serial NOR Flash memory, which is configured as 4,194,304 x 8 internally. When it is in four I/O mode, the structure becomes 8,388,608 bits x 4. When it is in two I/O mode, the structure becomes 16,777,216 bits x 2. MX25L3233F features a serial peripheral interface and software protocol allowing operation on a simple 3-wire bus while it is in single I/O mode.
The three bus signals are a clock input (SCLK), a serial data input (SI), and a serial data output (SO). Serial access to the device is enabled by CS# input. MX25L3233F, MXSMIO? (Serial Multi I/O) flash memory, provides sequential read operation on the whole chip and multi-I/O features.
When it is in quad I/O mode, the SI pin, SO pin, WP# pin and HOLD# pin become SIO0 pin, SIO1 pin, SIO2 pin and SIO3 pin for address/dummy bits input and data Input/Output.
After program/erase command is issued, auto program/erase algorithms which program/erase and verify the specified page or sector/block locations will be executed. Program command is executed on byte basis, or page (256 bytes) basis. Erase command is executed on 4K-byte sector, 32K-byte/64K-byte block, or whole chip basis.
The status read command can be issued to detect completion status of a program or erase operation via WIP bit. When the device is not in operation and CS# is high, it is put in standby mode.
The MX25L3233F utilizes Macronix's proprietary memory cell, which reliably stores memory contents even after 100,000 program and erase cycles.